Technical Specifications:
Product number: XH-M603
Input voltage: DC 10~30V
Maximum current: Up to 20A
Control precision: 0.1V
Display accuracy: 0.1V
Output type: Direct output
Voltage tolerance: ±0.1V
Application Fields: 12-24V storage battery (Applicable to solar cells, new energy batteries, Lead-acid batteries, nickel-cadmium batteries, nickel-metal hydride batteries, lithium-ion batteries, polymer batteries, Car battery, electric car battery)
Weight: 40g
Size: 82 mm×58 mm×18 mm/ 3.23″×2.28″×0.71″
NOTE:
If it is not displayed? Then you may not have battery!
Be sure to connect the battery to work properly. If the motherboard does not detect the battery, it will not work!
Battery charging usually uses slow charging, that is, the charging voltage is about 1.2 times the rated voltage, and the charging current is about 0.1 times the rated current.
Instructions:
1. Set Starting Voltage: in normal display voltage state,press the start button will display start charging voltage;long press for 3s the digital tube will flash: Set the voltage value by pressing the start/stop button.
2. Set Stop Voltage: in normal display voltage state,press the stop button will display stoping charge voltage;long press the button for 3s the digital tube will flash;Set the voltage value by pressing the start/stop button.
3. Factory Reset: in power on state press the start/stop button at the same time,digital tube will display 888;that represents factory reset settings.
Package includes:
1 x XH-M603 Charging Control Module
Price : $8.88
Brand : Anmbest
