EPEVER 40A MPPT Solar Charger Controller Tracer 4210 AN Solar Charge with LCD Display
★ Multiple load control modes: manual control, lighting ON / OFF, light on + timer
★ Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency not less than 99.5%
★ Wide MPPT operating voltage range.
★ LCD display design, dynamic display of operating data of the operation and working condition.
★ Available for PC monitoring and external display realize real-time data verification and parameter setting.
1> Remote Temperature Sensor (RTS300R47K3.81A):
Acquisition of battery temperature for undertaking temperature compensation of control parameters, the standard length of the cable is 3m.
2> USB to RS485 cable CC-USB-RS485-150U
USB to RS-485 converter is used to monitor each controller on the network using Solar Station PC software. The length of cable is 1.5m.
3> Remote Meter MT50
MT50 can display various operating data and fault of the system. The information can be displayed on a backlight LCD screen, the buttons are easy-to-operate, and the numeric display is readable.
Charge Rated Current:40A
System Voltage:12V/24V auto work
MPPT Controller Max Input Power: 520W (12V battery system) 1040W(24V battery system)
Battery Voltage Range: 8V ~ 32V
RS485 communication interface: 5VDC/100mA
Grounding type: Negative ground
Communication:Dual RJ45 port / RS485 / support PC software monitoring / support WiFi module for APP cloud monitoring / support centralized parallel monitoring.
Protections:Input over / low voltage, output over / low voltage, reverse connection,over temperature, short circuit, battery shedding etc.
1 x Tracer 4210 AN Solar Charge Controller
1 x Remote Meter MT50
1 x RS485
1 x RTS
1 x User Guide