Specification
Model:TRIRON4210N-mppt 40A Solar Controller
System voltage: 12/24VDC auto work
Rated charge current: 40A
Battery input voltage range:8-32V
Max. PV open circuit voltage:100Vat Min operating environment temp; 92Vat 25 environment temp
MPP voltage range: (Vbat+2V)72V
Max. PV Array Power:520W/12V;1040W/24V
Working environment temperature:-25℃～+55℃（with LCD）/-30℃～+55℃（without LCD）
Lithium battery: LiFePO4（4S;8S）/Li-NiCoMn（3S; 6S）
Self-consumption: ≤14mA(12V)；≤15mA(24V)
Temp. compensation: -3mV/℃/2V
Grounding: Common Negative
Terminals/Wire Size: 6AWG(16mm²)
DS2 module content:
Indicators: PV & battery & load working status
Buttons: View or set the parameters
LCD: PV display voltage/current /generated energy/Power Battery display voltage/current/temperature/capacity
Load:
-Display voltage/ current/ power/ load working mode when the controller communicates with the PC or APP.
-Display voltage/current/power power consumption when the controller communicates with the inverter(only epever inverter).
UCS module content:
USB interface module: Dual USB 5V 2.2A USB output for electronic equipment, NOTE: USB interface is output when the load is ON.
COM port-RS485 interface: Controller as slave, Connect to PC or phone.
-PC software & mobile APP (For Andriod System) can remotely monitor the controller status through this port.
NOTE: PC software & mobile APP need RS485 cable or wifi box to connect your device, RS485 cable and WIFI box doesn’t include package.It is optional.
Package Including
1x EPEVER TRIRON4210N+UCS+DS2 module Negative solar Controller
1xTemputer sensor
1xRS485 communicate cable
2xMC4 Connector
1x English User Manual of controller
1x MT50 remote controller
