EPever 80A Mppt Charge Controller 48V 36V 24V 12V Auto Negative Ground MAX 200V 4000W Input
Feature:
1.High quality & low failure rate components of ST and Infineon to ensure the product’s life
2.Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than
3.99.5%,Maximum DC/DC transfer efficiency is as high as 98.6%.★ , full load efficiency is up to 98% ★
4.Advanced MPPT control algorithm will minimize the MPP loss rate and loss time
5.The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
6.The wider range of MPP operating voltage.
7.Auto control system to limit the charging power & current go over the rated value.
8.Battery temperature compensation function
9.Real-time energy recording and statistical function
10.Automatic over-temperature power reduction function
Electronic protection:
PV Over Current/power
PV Short Circuit
PV Reverse Polarity
Night Reverse Charging
Battery Over Voltage
Battery Over Discharge
Battery Overheating
Controller Overheating
TVS High Voltage Transients
Certification
Safety:EN/IEC62109-1
EMC:EN61000-6-3/EN61000-6-1
FCC:47 CFR Part 15, Subpart B
ROHS:IEC62321-3-1
Specifications
Nominal System：12/24/36/48VDC or Auto
Battery Input:8V～68V
Battery Type:Sealed(Default)/Gel/Flooded/User
Battery fuse:150A/58V
Rated charge current::80A
Rated charge Power:1000W/12V 2000W/24V 3000W/36V 4000W/48V
Max. PV open:150V
Temperature compens:－3mV/℃/2V(Default)
Grounding:Common NEGATIVE grounding
Enclosure:IP20
Pollution degree:PD2
Dimension:394×240×134mm
Weight:6.1kg
Package Including
1X80A mppt charge controller
1XBattery voltage Sensor Terminal
1XLoad Control Delay Terminal
1XDiesel generator relay Terminal
1XLocal Temperature Sensor
1XEnglish User manual
