Icstation battery charging controller module is just voltage controller,it can not adjust voltage 1.Support DC 6-48V battery Lithium battery
2.Set up parameter via UP/DOWN/SET button
3.Support Dual Working mode:
(1)Charging mode IN: We can set the upper limit voltage UP and the lower limit voltage dn; when the battery voltage ≤ the lower limit voltage dn, the relay is turned on, the charger starts to charge the battery; when the battery voltage ≥ the upper limit voltage UP, the relay is turned off, and an automatic charging is completed; the relay is turned on, IN flashes to indicate that charging is in progress.
(2)Discharge Mode OUT:We can set the upper limit voltage UP and the lower limit voltage dn; when the battery voltage ≥ the upper limit voltage UP, the relay is turned on, and the discharge starts; when the battery voltage ≤ the lower limit voltage dn, the relay is turned off, and an automatic discharge function is completed; the relay is turned on, and the OUT blinks.It indicates that it is discharging.
4.Button function:
UP button: Short press, it will display the time and percentage. Long press for 5s to switch mode, charging mode: IN, discharge mode: OUT
DOWN button: Short press, ON/OFF the relay ,the lcd display OFF, the relay is turned off;long press DOWN button to set the status of the LCD backlight. L-P: OFF backlight is always on, ON: backlight is automatically turned off after 5-10 minutes; any button wakes up after being turned off.
SET Button:Short press ,we can read current parameters; long press the SET button to enter the parameter setting interface, set UP: voltage upper limit, dn: voltage lower limit, OP: conduction time, dOP: delay on time (0-999s), discharge mode There is FOP: forced on time (0-10 s)
