Descriptions:
1.Intelligent 3-tage PWM charging mode
2.Simple button operation
3.Adjustable charging and discharging control parameters
4.Various load mode
5.Battery over discharge/overvoltage/low voltage protection
6.Battery reverse discharge protection
7.12V/24V/36V/48V full automatic identification
8.LCD display screen with backlight function
9.Reverse light control mode
10.Accumulated ampere hours
11.Voltage temperature compensation
Specification:
Rated voltage: 12V/24V/36V/48V DC Auto
Maximum charging current: 60A
Input voltage: ≤100V (12V/24V/36V/48V Auto)
Temperature compensation: -4mV / Cell / ℃
USB power: 5V USB, the maxium output current is 2A
Package List:
1 x Solar Charge Controller
1 x User Manual
Notice:
1.Get the tools and cables ready. Select the appropriate cable to ensure that the current density is less than <6A/ mm2, which is conductive to reduce the cable voltage damage
2.This controller will be heat when working. Please install the controller on the flat,well ventilated environment.
3.In the process of connecting wires, please connect the battery first (in order to ensure the correct indentification of the battery voltage level) ,then connect the solar panel. After the controller completes the battery voltage lever indentification, manually close the load output of the controller and connect the controller finally.
4.In order to use security, please do not use solar panels that exceed the rated current of the solar controller; please do not connect the load over rated current; please do not use AC/DC switching power supply instead of solar panel to cornet the controller.
