Price : $22.98
Brand : iSunergy

iSunergy MPPT Solar Charge Controller 30A 12V/24V Auto Solar Panel Intelligent Regulator with Dual USB Port LCD Display for Lead Acid Batteries

1. Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focusing tracking.
2. Acomplete three-phase charge management, effectively protect the battery, the battery is more durable.
3. Built-in overheating, over current short circuit, open circuit protection, reverse connection protection,when the fault is eliminated, the controller automatically recovers, does not damage the device.
4. Bidirectional Mos tube anti-back flow circuit, high-power charging mode, ultra-low heat.

Rated voltage: 12/24V Auto
Rated current: 30A
Max solar input: 23V(12V battery)/46V (24V battery)
USB output: 2 way USB output, 5V/2.5A(Max)
Self-consume: <10mA

1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installion.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL. it is not suited for nickel metal Hydride, Lithium Ions or other batteries.
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.

Package List:
1 x Solar Panels Battery Charge Controller
1 x User Manual


Comments are closed.