The P-Series Charge Controller is suitable for a variety of off-grid solar applications.It can protect the battery from excessive discharge and excessive charging of a solar cell module loads
1.Various real-time data is displayed on one display(Volt, Amaps, %,°C)
2.Advanced MPPT technology ensures up to 99.5% tracking efficiency.
3.Battery model selection:lead acid(gel,sealed,submerged)
4.Charging mode:three levels(constant current, constant voltage, floating charge) to extend battery life.
Suitable for various specifications of solar panel
12V:open circuit voltage ≤48V(Voc) maximum. PV input power:780W
24V:Open circuit voltage ≤100V(Voc) maximum.PV input power:1560W
Automatic identification of 12V/24V system voltage
Rated charging/discharging current:60A
Maximum open circuit voltage solar panel (Voc):18V-48V(12V)/36V-96V(24V)
Power terminal:10 AWG
User programmable for battery Type, load control,dual timer settings
Battery must be connected first!
Never connect the soalr panel array to the controller Without/Before a Battery.
THE DISASSEMBLY SEQUENCE IS CONTRARY TO THE WIRING ORDER.
Never connect any inverter/wind/Alternator/Charger into the charge controller!
Ensure the battery voltage is enough.(>9V)
Never exceed the max input power/Voltage of your controller
1*MPPT P60 solar charge controller