This 40A solar charge controller, features with LCD display, 12V/24V/36V/48V system optional, max 150V DC PV input voltage, RS485 communication, high efficient MPPT controller algorithm, can meet your different needs.
Product: Solar Charge Controller
MPPT efficiency: ≥99.5%
System type: DC12V/24V/36V/48V (automatic recognition)
Max. PV input voltage: 150V
Start the charge voltage point: 5V higher than current battery voltage
Low input voltage protection point: 3V higher than current battery voltage
Over voltage protection point: 150V
High voltage recovery point: 145V
Charge method: 3 stages (constant current(MPPT), constant voltage, floating charge)
Battery types optional(Default Gel battery): Flooded, Sealed lead acid, Gel battery (Other types of the batteries also can be defined)
Constant voltage: Please check the charge voltage according to the battery type form.
Floating voltage: Please check the charge voltage according to the battery type form.
Rated charge current: 40A
Temperature factor: ±0.02%/℃
Temperature compensation: -3mV/℃/2V (default)
LCD display: System type, PV voltage, Charge voltage, Charge current, Charge power, temperature etc.
Output control set mode: Controller button or PC software
PC software: RS485
Mechanical protection: IP21
Humidity: 0~90%RH ( no condense)
Atmospheric pressure: 70~106 kPa
Package size: 32x22x14 cm (13x9x6 inch)
Gross weight: 2.5 kg (6 lbs)
1 x MPPT Solar Charge Controller
1 x Temperature Sensing Wire
1 x Screwdriver
2 x Hang Brackets
1 x Set of Installation Screws
1 x Product Manual