Why Choose Spexc Solar Charge Controller？
Efficient Charge Controller
Compared with normal solar charge controller, this MPPT solar controller could increase efficiency by 10%-30%.
SOC Function
This MPPT controller has perfect SOC function, control charge current, and supply power to the loads.This controller can charge and discharge at the same time.
Specifications
System voltage: 12 / 24V adaptive
Rated charging current: 30a | 60a | 100a
Rated discharge current: 10a | 20a | 30a
Floating Charge Voltage : 13.7 V ( Default, Adjustable )
Discharge cut-off voltage::10.7 V ( default, adjustable )
Discharge recovery voltage: 12.6 V ( default, adjustable )
USB Output : 5V / 2A MAX
How to Set up the Solar Controller?
Step 1. Press the menu button in the main interface, select the interface to adjust the corresponding parameters and set the working state of the equipment.
Step 2. Working mode of load, COT manual mode load output, AUTO automatic light control mode. 00: 58 Set the output time after no sunlight.
Step 3. Set the real-time working status: D 13.1 V the battery voltage value display, D 29.1 ℃ temperature display, D2.1A solar charging current display, large current charging arrow flows fast, and vice versa. The d0.0a output load current display, the large current discharge arrow flows fast and vice versa.
Attention
1.Make sure the battery has enough voltage so that the controller can identify the battery before the first installation.
2.The solar controller is only suitable for lead-acid batteries, such as open type, AGM, gel, etc.
3.Not suitable for Ni – MH batteries, Li – ion batteries or other batteries.
Packing Included:
1 X Solar Charging Controller
1 X Manual User
