Size：60A
Product Name: LCD solar controller
Material: ROHS+ABS
Size: about 168*94*35mm/6.61*3.70*1.38in
System voltage: 12 / 24V adaptive
Rated charging current: 30a | 60a | 100a
Rated discharge current: 10a | 20a | 30a
Solar photo voltaic voltage :12V battery with 18V solar panel, 24V battery with 36 solar panel
Full Voltage Value : Lithium Battery (12.2V) | B02 Colloidal Battery (14.2V) | B03 Open Cell (14.6V)
Floating Charge Voltage : 13.7 V ( Default, Adjustable )
Discharge cut-off voltage::10.7 V ( default, adjustable )
Discharge recovery voltage: 12.6 V ( default, adjustable )
Standby current :10mA
USB Output : 5V / 2A MAX
Setup Description:
1. Press the menu key in the main interface, select the interface to adjust the corresponding parameters and set the working state of the equipment.
2. Working mode of load, COT manual mode load output, AUTO automatic light control mode. 00: 58 Set the output time after no sunlight.
3. Set the real-time working status: D 13.1 V the battery voltage value display, D 29.1 ℃ temperature display, D2.1A solar charging current display, large current charging arrow flows fast, and vice versa. The d0.0a output load current display, the large current discharge arrow flows fast and vice versa.
Note:
Make sure the battery has enough voltage so that the controller can identify the battery before the first installation.
The solar controller is only suitable for lead-acid batteries, such as open type, AGM, gel, etc.
Not suitable for Ni – MH batteries, Li – ion batteries or other batteries.
Packing List:
1 *Solar charging controller
1 *Manual
1 *Packing box
