USAGE NOTES:
1: Please wire strictly according to the wiring diagram,can not short circuit!
2: After the wire is connected, it needs to be charged first then output.
3: When connecting 4 batteries in series, please make sure that the voltage of each battery is the same. If not, please full each battery separately and use it in series. In the discharge test, the battery with the fastest voltage drop was the bad battery.
Explain:
Do not mix good and bad batteries together! The capacity/internal resistance of the 4 batteries is as close as possible (2 good batteries + 2 bad battery = 4 bad batteries).
The lithium battery protection board parameters:
Maximum operating current: 100A
Maximum instantaneous current: 120A
Over charge voltage range: 3.75V±0.05V
Quiescent current: less than 20uA
Internal resistance: less than 20mΩ
Charging voltage: 14.8V-16V
Charging current: 10A Max
Working temperature: -40 – +50°C
Storage conditions: -40 – +80°C
Short-circuit protection: Trigger condition: External load shorted. Release condition: disconnect the load.
Size: 56*48*4.0mm
Package Included:
1pcs 100A 4S 3.2V Lithium Iron Phosphate Battery Protection Board
