The tilt mount will support on-grid and off-grid systems, and will support all Renogy Solar Panel sizes.
However, please note that angle adjustability will decrease as the panel size increases.
The tilt mount is designed to allow adjustment of the panel for optimum performance.
The tilt mount can be used on any flat surface, provided that the correct fastening techniques are applied.
2 Extension Bracket
4 L-Bracket Feet
4 L-Joint (C)
4 Cap Bolt-55mm
6 Cap Bolt-25mm
10 Spring Washer
Recommended Tools (Not Provided):
14mm wrench or socket for larger hex nut
4mm hex key (Allen Wrench)
This equipment should be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of the equipment and the hazards involved. Failure to observe this precaution may result in bodily injury. Protective gloves and safety glasses should be worn during installation.
The chance to strip nuts and bolts exists
Multiple people should be involved in installation
When mounting to a roof or elevated surface, exercise caution when climbing a ladder
When on a roof or elevated surface, always use a strap or harness
1 year warranty