❤Specification:
★Voltage: DC 12V/24V
★Self-consuming: 10MA
★Rated Charge Current: 20A
★Rated Load Current: 20A
★Over charge Protection: 14.4V/28.8V
★Over charge Floating charge: 13.7V/27.4V
★Charge recover voltage: 12.6V/25.2V
★Over discharge Protection: 10.7V/21.4V
★Over discharge Recover: 12.6V/25.2V
★USB output: 5V/3A
★Operating temperature: -35℃-60℃
★Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in
❤Warmly Tips
Please keep it in cool and well ventilated place to maintain good heat dissipation.
the regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
Make sure your battery has enough voltage for the controller to recognize the battery before first installation.
Indoor use only: the working temperature of this controller is -35°C to +60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.
When the battery voltage is too low, the controller will stop to output(≦ 8V, controller turn off itself, LCD is blank,≦ 10.7V, 12Voutput ports are not available); after the solar panels charging, the battery will return to 12.6 V. It is a natural to output.
❤Advantage
(1)Automatically manage the working of solar panel and battery in solar system.
(2)Overloading and short-circuit protection.
(3)Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.
(4)Protection from lightning strike.
(5)Prolong the battery life cycle and keep the load work well.
(6)Easy to set up and operate.
(7)Suitable for small solar energy system.
