Brand : Vktech

Vktech Solar Panel Battery Regulator Charge Controller 12V 24V Auto Switch (30A)

Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.

This controller can charge and discharge at the same time. It has perfect SOC function, control charge current, and supply power to the loads.

Features:

Always keep the battery on fill voltage condition.

Prevent the battery from over-charging.

Prevent the battery from over-discharging.

Prevent the battery from reverse charging to solar panels during nights.

Reverse Polarity Protection for Battery

Reverse Polarity Protection for Solar Panels

When the battery voltage is low, the controller will automatically cut off the load from the system.

If the voltage of battery is back to normal and the load will restart working.

Thunder protection

According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage.

(The parameter is default under 25℃ condition, locked by the CPU procedure, cannot adjust.)

The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.

Specification:

Rated charge current: 10A, 30A

Rated load current: 10A, 30A

Work voltage: 12V/24V AUTO

Voltage of stop power supply: 10.8V or 21.6V

Voltage of resume power supply: 12.6V or 25.2V

Voltage of stop charging: 14.4V or 28.8V

Temperature coefficient of voltage stop charge: -3mV/℃ cell

Working temperature: -20℃~+60℃

Package includes:

1 x Solar Charge Controller

1 x English user’s manual

 

Comments are closed.